Aeternus Brass
is a virtual musical ensemble and solo
trumpet, trombone, tuba, French horn, flugelhorn
and cornet instruments. It includes brass sections, orchestral ensemble and
sampled legato and staccato articulations. Additionally
introduces four analog
brasses, based on classic polyphonic synthesizers.
Available
for macOS as plugin in
Audio
Unit (.component), VST (.vst) and VST3 (.vst3) formats.
The Audio Unit
Component, VST and VST3 plug-ins requires of a MIDI
Controller to play this virtual instrumentof and a
compatible host, digital audio workstation (DAW) or MIDI
sequencer that supports Audio Units and VST technology. They
can be "plugged in" to process audio by applications such as
Logic Pro, GarageBand, Cubase, Ableton Live, REAPER, Studio
One Professional, Ardour, MainStage and Digital Performer
among others.
The software
package is distributed via Internet in an Apple Disk Image
DMG file and compatible with macOS and all previous OS X.
• Quick selector to switch between different preset sounds:
#
List of
Preset Sounds /
Demo
↓
1
Brass Section Ensemble 1
2
Brass Section Ensemble 2
3
Brass Section Ensemble 3
4
Brass Section Ensemble 4
5
Orchestral Brass Ensemble
6
Brass Ensemble Staccato
7
Brass Hit / Stab / Fall
Effects
8
Trumpet Legato
9
Trumpet Staccato
10
Trumpet Bubble Harmon Mute
11
Trombone Legato
12
Trombone Staccato
13
Tuba Legato
14
Tuba Staccato
15
French Horn Legato
16
French Horn Staccato
17
French Horns Section
18
Flugelhorn Legato
19
Cornet Legato
20
Synth Brass
21
Mellotron M400 GC3 Brass
22
Roland SC-88 Velo Brass
23
Oberheim Xpander Brass
24
Memorymoog Brass
•
Wider Spatial Auralization: The brass sections
ensembles and synthesized brass brings a stereophonic
widening sound to increase the
audible perspective or perceived breadth, even without using the built-in
reverberation.
•
ADSR envelope generator with Attack, Sustain, Decay and Release parameters:
Ø Attack
determines the time it takes for the note to get to the maximum level.
Ø Decay
determines the time it takes for the note to go from the maximum level
to the sustain level (controlled by Sustain).
Ø Sustain
determines level the sound is played at while the note is held (after
the other envelope states, Attack and Decay, have been completed).
Ø Release
determines the time it takes for the note to fall from the sustain level
to zero (silence) level when it is released.
• Pitch Bend: The Pitch Bend knob directly changes the pitch of the selected
instrument.
Ø Pitch
Bend center position: is normal pitch.
Ø Pitch
Bend down: Specifies the amount of pitch change that will occur when the
pitch bend/modulation lever is moved to the left.
Ø Pitch
Bend up: Specifies the amount of pitch change that will occur when the
pitch bend/modulation lever is moved the right.
• Low-Frequency Oscillator Controls: These knobs apply LFO modulation to the
selected instrument. Use the ‘Rate’ (Frequency) and ‘Depth’ (Amplitude)
knobs to adjust the LFO effect as required. By using the LFO to modulate
various aspects of the audio signal, you can apply effects such as vibrato
or tremolo.
• Reverb Room built-in: provides a spaciousness and depth to simulate the
sound reflections from walls, floors and ceilings following a sound created
in an acoustically reflective environment. Small rooms can be modeled as
well as large spaces.
• Filter Type. Combo box to switch between the following options:
Ø Low
Pass (LPF): a filter that passes signals with a frequency lower than a
certain cutoff frequency and attenuates signals with frequencies higher
than the cutoff frequency.
Ø High
Pass (HPF): a filter that passes signals with a frequency higher than a
certain cutoff frequency and attenuates signals with frequencies lower
than the cutoff frequency.
Ø None:
No filter is applied.
Ø Cutoff
Frequency Filter: Sets the cutoff frequency for the low pass and high
pass filters.
• Amplitude Range Controls: The sensitivity level is set by the user:
• Panning potentiometer control: Set the panning of the instrument. Adjusts
the stereo pan position of the signal output, which determines how much of
signal is sent to the left and right channels.
For existing registered users of
any Aeternus Brass format, you can order using
a special
Crossgrade order page located
here.
Promo: Upgrade to Aeternus Brass v2.xx from previous versions.
Buy Aeternus Brass Sampler
and Sample Library (Audio Unit and VST for macOS) online through PayPal
Secure PayPal Payment Services
All
payments are handled securely online through PayPal.
You'll be protected with PayPal's Buyer Protection so you know
your order will be safe and secure.
Please check
to make sure you are using
a
valid PayPal email
address
before ordering, because
after
your purchase and usually
in less than 24 hours, we
will send to your
assigned email
address a link in order to download the registered
version of your selected software in a DMG file (Apple
Disk Image format, Volume Type: HFS+ Mac OS Extended).
Price: USD 38,90 via
PayPal
To Buy, click
"Add to Cart" button:
Syntheway offers the demo versions for potential customers to
have adequate opportunity to assess the value of these
products prior to purchase a license. Unlike physical goods,
electronically distributed software can be copied. Once a
purchase has been made, it is unfortunately not possible for
us recovering that intangible copy downloaded from
Syntheway. Therefore, Syntheway does not accept refunds,
returns, or exchanges.
VST
and VST3 are a trademark of Steinberg Soft- und Hardware
GmbH.
Audio Units™ is a trademark of Apple
Inc.
Mellotron M400 is a trademark of Streetly
Electronics.
Roland SC-88 is a registered trademark of Roland
Corporation.
Oberheim Xpander is a trademark of Oberheim
Electronics.
Minimoog, is a trademarks of Moog Music, Inc.
Mac®,
macOS®, OS X®
are a trademark of Apple Inc.,
registered in the U.S. and other countries.
