Features

• Quick loader to select between different instruments:

# List of Preset Sounds / Demo ↓ 1 Mandolin 2 Mandolin Tremolo 3 Archtop Mandolin 4 Mandocello 5 Mandola 6 Octave Mandolin 7 Electric Mandolin 8 Banjolin 9 Tenor Banjo 10 Plectrum Banjo 11 Banjolele Banjo Uke 12 5-String Banjo

• ADSR envelope generator with Attack, Sustain, Decay and Release parameters:

Ø Attack determines the time it takes for the note to get to the maximum level.
Ø Decay determines the time it takes for the note to go from the maximum level to the sustain level (controlled by Sustain).
Ø Sustain determines the level of the sound is played at while the note is held (after the other envelope states, Attack and Decay, have been completed).
Ø Release determines the time it takes for the note to fall from the sustain level to zero (silence) level when it is released.

• Pitch Bend: The Pitch Bend knob directly changes the pitch of the selected instrument.

Ø Pitch Bend center position: is normal pitch.
Ø Pitch Bend down: Specifies the amount of pitch change that will occur when the pitch bend/modulation lever is moved to the left.
Ø Pitch Bend up: Specifies the amount of pitch change that will occur when the pitch bend/modulation lever is moved the right.

• Low-Frequency Oscillator Controls: These knobs apply LFO modulation to the selected instrument. Use the ‘Rate’ (Frequency) and ‘Depth’ (Amplitude) knobs to adjust the LFO effect as required. By using the LFO to modulate various aspects of the audio signal, you can apply effects such as vibrato or tremolo.

• Virtual Reverb Room built-in: free variation of acoustic ambience thanks to complete separation of the instrument and room. Small rooms can be modeled as well as large spaces.

• Filter Type. Combo box to switch between the following options:

Ø Low Pass (LPF): a filter that passes signals with a frequency lower than a certain cutoff frequency and attenuates signals with frequencies higher than the cutoff frequency.
Ø High Pass (HPF): a filter that passes signals with a frequency higher than a certain cutoff frequency and attenuates signals with frequencies lower than the cutoff frequency.
Ø None: No filter is applied.
Ø Cutoff Frequency Filter: Sets the cutoff frequency for the low pass and high pass filters.

• Amplitude Range Parameters: It controls the loudness, the way in which we perceive amplitude.The sensitivity level is set by the user:

Ø Amplitude range (low) - sets amplitude range, lower bound (dB)
Ø Amplitude range (high) - sets amplitude range, upper bound (dB)

• Volume: Adjusts the volume of the instrument.

• Pan: Set the panning of the instrument. Adjusts the stereo pan position of the signal output, which determines how much of signal is sent to the left and right channels.

Banjodoline Virtual Instruments List